Toro Z Master Z597 - Caster Fork Assembly Removal

3-2 Z Master Z597 Diesel Service Manual
3
CHASSIS
Caster Fork Assembly Removal
1. Raise the front of the unit off the ground, allowing
enough clearance to remove the castor fork from the
bottom of the hub.
2. With a hammer and chisel, remove the top grease
cap (Fig. 009).
Fig 009 mvc-1531
Fig 011 DSC-1533
4. Remove the Belleville washers, caster fork and
wheel assembly (Fig. 011).
Fig 010 DSC-1532
3. Remove the locknut (Fig. 010).