Toro Z Master Z597 - Caster Fork Assembly

3-4 Z Master Z597 Diesel Service Manual
3
5. Pack the upper and lower tapered bearings prior to
installation (Fig. 016).
Castor Fork Assembly
Fig 016 DSC-1539
2. Install the upper bearing.
3. Install the Belleville (spring) washers as shown in
(Fig. 019).
A. Dust Cap
B. Locknut
C. Spring Washers
Fig 018 DSC-1533
Fig 019 washers line art
1. Install the castor fork into the frame (Fig. 018).
6. Install the lower bearing and seal, with the open end
of the seal facing up (Fig. 017).
Fig 017 DSC-1538
CHASSIS
A
B
C