7-8 Z Master 597 Diesel Series Service Manual
7
MOWER DECKS
12. Install the idler pulley to the fan pump tension
assembly with a bolt and nut (Fig. 411).
Fig 411 DSC-2597
13. Pull the spring loaded idler down and install the fan
drive belt (Fig. 412).
Fig 412 DSC-2596
Fig 414 DSC-2596
2. Pull the spring loaded idler down and remove the fan
drive belt (Fig. 414).
Fig 413 DSC-2595
1. Loosen the 4 bolts holding the rear bumper
assembly and remove from the unit (Fig. 413).
14. Install the rear bumper assembly and tighten the 4
bolts.
Mower Deck Removal
To Next Page
Loading...
