7-7Z Master 597 Diesel Series Service Manual
7
MOWER DECKS
Install the mower drive belt onto the outer clutch
sheave, then the spring loaded idler pulley (Fig.
407).
Fig 407 DSC-2651
9. Install bolt spacer, washers, and nut retaining the
clutch/brake strap to the frame (Fig. 408). See Fig.
447 (pg 7-17) for hardware assembly sequence.
Fig 408 DSC-2604
Fig 410 DSC-2598
11. Install bolt, spacer, washer, and nut to retain the
extension spring to the top of the fan pump tension
assembly (Fig. 410).
Fig 409 DSC-2601
10. Connect the PTO clutch harness to the wiring
harness (Fig. 409).
To Next Page
Loading...
