Toro Z Master Z597 - Mower Spindle Removal

7-18 Z Master 597 Diesel Series Service Manual
7
25. Install the rear bumper assembly and tighten the 4
bolts (Fig. 450).
MOWER DECKS
Mower Spindle Removal
Fig 450 DSC-2595
Fig 451 DSC-2625
This applies to removing any of the three mower
spindles. This procedure shows removing the right side
spindle.
1. Use a hoist or the Z Stand to raise the front of the
mower deck.
2. Chock or block the drive wheels.
3. Disconnect the battery negative cable.
4. Lower the mower deck to the lowest position.
5. Lift the oor pan (Fig. 451).