3-17Z Master Z597 Diesel Service Manual
3
Brake Lever Installation
6. Using a hammer and punch, drive both brake lever
control bearings from the brake pivot (Fig. 066).
Fig 066 DSC-1622
7. Inspect the brake shaft and bushings for excessive
wear. Replace any worn or broken components
(Fig. 067).
Fig 067 DSC-1623
Fig 068 DSC-1624
1. Raise the left rear tire off the ground (Fig. 068).
Reverse the order of removal
Brake Band Removal
2. Remove the four wheel lug bolts.
CHASSIS
A
A. Brake Lever C. Cotter Pin
B. Bushings
B
C
To Next Page
Loading...
