Toro Z Master Z597 - Engine Removal

5-2 Z Master Z597 Diesel Service Manual
5
ENGINE
Engine Removal
1. Disconnect the negative, then the positive battery
cable and remove the battery from the unit.
2. Unlatch and open the engine hood. Loosen and
remove the rear heat shield from the frame (Fig.
222).
Fig 222 DSC-2370
3. Remove the two knobs located on the engine access
panel. Remove the engine belt shield and the engine
access panel (Fig. 223).
Fig 223 DSC-2071
Fig 225 DSC-2411
5. Remove the left and right hair pins, the clevis pins
and remove the hood (Fig. 225)
Fig 224 DSC-2410
4. Remove the hood lanyard from the right and left
radiator support bolts (Fig. 224)