Toro Z Master Z597 - Page 106

5-19Z Master Z597 Diesel Service Manual
5
33. Install the three hydraulic lines to the hydraulic fan
motor (Fig. 286).
Fig 286 DSC-2500
35. Install the engine inlet hose to the radiator and
tighten the hose clamp (Fig. 288)
Fig 288 DSC-2425
34. On the right side of the radiator, install the hose for
the engine outlet to the radiator. Install the clamp
and tighten the clamp through the access hole in the
fan mounting plate (Fig. 287).
36. Install the two clamps holding the engine inlet
cooling hose and the overow hose to the fan
mounting plate (Fig. 289).
Fig 287 DSC-2428
Fig 289 DSC-2374
ENGINE