Toro Z Master Z597 - Page 91

5-4 Z Master Z597 Diesel Service Manual
5
ENGINE
10. Place a small drain pan on top of the engine.
Loosen and remove the hydraulic lines to the
hydraulic fan motor (Fig. 230). Cap the ttings to
protect from any dirt or debris.
Fig 230 DSC-2378
11. Remove the case drain hydraulic line at the tee
tting, located at the left front corner of the radiator
(Fig. 231). A drain pan will be needed to catch any
oil from the hydraulic line. Cap the ttings to prevent
contamination.
Fig 231 DSC-2429
Fig 232 DSC-2433
12. Loosen and remove the tank return hydraulic hose
from the radiator. This line is located at the left rear
corner of the radiator (Fig. 232). Cap the ttings to
prevent contamination.
Fig 229 DSC-2428
9. Located on the right side of the fan mounting plate
assembly is an access hole to remove the hose
clamp for the engine outlet hose, located at the
radiator (Fig. 229). Remove the clamp and lower the
hose to drain any coolant that is left in the hose.