7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33094
7.1 Media
E7-5
7.1.4 Effective Print Area
7.1.4.1 Relationship between Print Head Effective Print Width and Paper Width
7.1.4.2 Effective Print Area of Tags and Labels
NOTES:
1. Print quality in the shaded area is not guaranteed. For the label, printing in the 1-mm width area around
the label is not guaranteed as well as the shaded area shown above.
2. This printer paper set position is left side,
The center of the paper (label and tag) is not almost aligned with the center of the print head.
3. If printing is performed in the shaded area, the ribbon may wrinkle. This may affect the print quality of
the guaranteed printing area.
2 mm
Outside
printing
area
Outside
printing
area
8 mm
104.0mm±0.2mm
(Effective print head width)
114.0mm
(Max. paper width)
Printing area
30.0mm
(Min. paper width)
Paper
position
(Left)
Paper
position
(Right)
10 mm to 1500 mm
Label/tag length
Feed direction
Label/tag width (See Note below.)
(Backing paper width)
1.5 mm from right
edge of paper
1 mm
Detection area
3.5 mm from left
edge of paper
Detection area
1 mm
To Next Page
Loading...
Need help?
General
