Toshiba B-EX4T2 SERIES - Options

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33094
1.6 Options
E1- 5
Option Name Type Description
Disc cutter module B-EX204-QM-R
Disc cutter
Each time media is cut, the media feed is
stopped.
Strip module B-EX904-H-QM-R This allows use of on-demand (peel-off)
operation or to take-up labels and backing
paper together when using the rewind guide
plate. To purchase the strip module, please
inquire with your local distributor.
RFID module mount
kit
B-EX700-RFID-H1-QM-
R
This kit is to mount Tagsys HF band RFID
module and antenna.
203-dpi print head B-EX704-TPH2-QM-R This print head enables a conversion of a
300dpi print head of the B-EX4T2-TS12 model
into 203dpi print head.
300-dpi print head B-EX704-TPH3-QM-R This print head enables a conversion of a
203dpi print head of the B-EX4T2-GS12 model
into 300dpi print head.
600-dpi print head B-EX704-TPH6-QM-R Only with B-EX4T2-HS12 Model
RTC & USB host
interface card
B-EX700-RTC-QM-R This card holds the current time: year, month,
day, hour, minute, second and provides a USB
host interface.
Expansion I/O
interface card
B-EX700-IO-QM-R Installing this card in the printer allows
connection to an external device with the
exclusive interface.
Parallel interface
card
B-EX700-CEN-QM-R Installing this card provides a Centronics
interface port.
Serial interface card B-EX700-RS-QM-R Installing this card provides an RS-232C
interface port.
Wireless LAN
interface card
B-EX700-WLAN-QM-R Installing this card provides Wireless LAN
communication.
NOTE:
To purchase the optional kits, please contact the nearest authorised TOSHIBA TEC representative or
TOSHIBA TEC Head Quarters.