EasyManua.ls Logo

Toshiba B-EX4T2 SERIES - Appendix 1 Messages and LEDs

Toshiba B-EX4T2 SERIES
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
APPENDIX 1 MESSAGES AND LEDS
ENGLISH VERSION EO1-33094
APPENDIX 1 MESSAGES AND LEDS
EA1- 1
APPENDIX 1 MESSAGES AND LEDS
Appendix 1 describes the LCD messages displayed on the operation panel.
Symbols in the message
1: : The LED is illuminated. : The LED is flashing. : The LED is unlit.
2: %%,%%%,%%%: Remaining memory size of the external memory: 0 to 09,999,999 (in K bytes)
3: ####: Remaining memory size for PC commands storage area in the internal memory: 0 to 3072 (in
K bytes)
4: &&&&: Remaining memory size for writable characters storage area: 0 to 3147 (in K bytes)
LE
D Indication
Printer Status
Restoration by
RESTART key
Acceptance of
Status Request
/
Reset Command
No.
LCD Message
ONLINE
ERROR
Yes/No
Yes/No
ON LINE
In online mode ----- Yes
1
ON LINE
In online mode (The printer is
communicating)
----- Yes
2
HEAD OPEN
The print head block is open in
online mode.
----- Yes
3
PAUSE
The printer is paused. Yes Yes
4
COMMS ERROR
A parity, overrun, or framing error
has occurred during communication
through the RS-232C.
Yes Yes
5
PAPER JAM
The media is jammed during paper
feed.
Yes Yes
6
CUTTER ERROR
A problem has occurred with the
cutter module.
Yes Yes
7
NO PAPER
The media has run out, or the
media is not loaded properly.
Yes Yes
8
NO RIBBON
The ribbon has run out. Yes Yes
9
HEAD OPEN
Feed or printing was attempted with
the print head block open.
Yes Yes
10
HEAD ERROR
There is a problem with the print
head.
Yes Yes
11
EXCESS HEAD TEMP
The print head has overheated. No Yes
12
RIBBON ERROR
The ribbon has be
en torn. A
problem has occurred with the
sensor that determines the torque
for the ribbon motor.
Yes Yes
13
REWIND FULL
An overflow error has occurred in
the rewind unit.
Yes Yes
14
SAVING####KB/&&&&KB
or
SAVING%,%%%.%%%KB
Writable character or PC command
save mode
----- Yes
15
FORMAT####KB/&&&&KB
or
FORMAT%,%%%.%%%KB
The storage area is being
initialised.
----- Yes
16
NOW LOADING…
TrueType font or BASIC program is
being downloaded.
----- Yes
17
MEMORY WRITE ERR.
An error has o
ccurred while writing
to flash memory or USB memory.
No Yes
18
FORMAT ERROR
An erase error has occurred while
formatting the flash memory or
USB memory.
No Yes
19
MEMORY FULL
Data cannot be stored because the
flash memory or USB memory
is
full.
No Yes

Table of Contents

Other manuals for Toshiba B-EX4T2 SERIES

Related product manuals