Toshiba B-EX4T2 SERIES User Manual

2. PRINTER SETUP ENGLISH VERSION EO1-33094
2.6 Printer Setting
E2-38
2.6.11 Real Time Clock (RTC)
The RTC menu allows the date and time to be set, enables the
battery check function, and selects the RTC data renewal timing
while labels are being printed.
The Real Time Clock Setting is effective only when an optional
RTC & USB Host Interface Card, B-EX700-RTC-QM-R, is
installed.
(1) DATE TIME
This parameter is to set date and time.
YY/MM/DD
hh:mm:ss
(2) BATTERY CHECK
Enable the low battery check function.
• OFF
• ON
(3) RENEWAL
This parameter is to choose when date and time are updated
while printing.
• BATCH The real time clock data is read only for the
first label in a batch, the same time is printed
on the all labels.
• PAGE The real time clock data is read at the start of
printing each label, the real time can be
printed on each label.
SYSTEM MODE
<8>BASIC
<9>FOR FACTORY
<10>RFID
<11>RTC
00 00 00
00 00 00 [RIGHT]

Toshiba B-EX4T2 SERIES Specifications

General

Print Method	Thermal transfer
Resolution	203 dpi
Print Width	104 mm
Interfaces	USB
Optional Interfaces	Wireless LAN
Barcodes	Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, ITF, Codabar, MSI
2D Codes	Data Matrix, PDF417, QR Code, Maxi Code
Operating Temperature	5°C to 40°C
Storage Temperature	-20°C to 60°C
Humidity	25 - 85% RH (Non-condensing)