Toshiba B-EX4T2 SERIES - Optional Cutter Module

4. MAINTENANCE ENGLISH VERSION EO1-33094
4.1 Cleaning
E4- 3
4.1.3 Optional Cutter Module
The disc cutter and rotary cutter are available as an option. They
are both cleaned in the same way. When removing the Cutter
Cover of the rotary cutter unit, remove the screws from the bottom
of the cover.
1. Loosen the two Plastic Head Screws to remove the Cutter
Cover.
2. Remove the jammed paper.
3. Clean the Cutter with a soft cloth slightly moistened with alcohol.
4. Attach the Cutter Cover.
WARNING!
1. Be sure to turn the power
off before cleaning the
Cutter Module.
2. As the cutter blade is
sharp, care should be
taken not to injure yourself
while cleaning.
Cutter Unit
Plastic Head Screw