(8) When “Completing the Found New Hardware
Wizard” is displayed, click the [Finish] button.
(9) When the installation is completed, a new printer icon is added to the Printer folder.
2.7.9 Installation under Windows Vista/Server 2008/7/Server2008R2 (USB with Plug &
Play Enabled)
(1) Turn on the PC.
Note: Log on as a user with administrative privilege.
(2) Turn on the printer and connect it to the PC with a USB cable.
(3) Installation of the device driver software is automatically started.
(4) After a short time, the printer driver installation will be completed.
(5) When the installation is completed, a new printer icon is added to the Printer folder.
To Next Page
Loading...
