7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33094
7.3 Recommended Media and Ribbon Types
E7-12
PRINT TONE FINE ADJUSTMENT VALUES BY SUPPLIES
For 203dpi model
Print speed Print
Mode
Ribbon Paper
3”/s 6”/s 10”/s 12”/s
Print
energy type
Remarks
Vellum -2 -2 -2 +2 Wax1
This combination is not
acceptable in the case of
10, 12ips and high
temperature environment.
TT1C 0 0 +2 +2 Wax1
In the case of 10, 12ips
and low temperature
environment requires
a print tone adjustment
to positive direction.
BEX-*****AW3
I-BEST S -2 0 +4 +6 Wax1
Serial bar code printed
at 12ips is unusable.
Vellum -4 -4 0 +2 Wax1
In the case of 3, 6ips
and high temperature
environment requires
a print tone adjustment
to negative direction.
TT1C -6 -4 +2 +4 Wax1
BEX-*****AW6F
I-BEST S -4 -4 +2 +4 Wax1
Vellum -8 -4 +2 unusable Wax1
In the case of 3, 6ips
and high temperature
environment requires
a print tone adjustment
to negative direction.
This combination is not
acceptable in the case of
10ips and high
temperature environment.
TT1C -6 -4 +6 +6 Wax1
In the case of 3, 6ips
and high temperature
environment requires
a print tone adjustment
to negative direction.
BEX-*****AW7F
I-BEST S -4 -2 unusable Wax1
In the case of 3ips
and high temperature
environment requires
a print tone adjustment
to negative direction.
Vellum 0 0 +4 +6 Semi-resin1
In the case of 6ips
and low temperature
environment requires
a print tone adjustment
to positive direction.
This combination is not
acceptable in the case of
10, 12ips and high
temperature environment.
TT1C +2 +4 +6 unusable Semi-resin1
VES-85 -4 T.B.D +2 +2 Semi-resin1
Thermal
transfer
type
BEX-*****AG3
I-BEST S 0 0 +4 unusable Semi-resin1
To Next Page
Loading...
