Toshiba B-EX4T2 SERIES - Wireless LAN Interface (Option); USB Host Interface (Option)

APPENDIX 2 INTERFACE ENGLISH VERSION EO1-33094
APPENDIX 2 INTERFACE
EA2- 4
 Wireless LAN (Option: B-EX700-WLAN-QM-R)
Standard: Conforming to IEEE802.11b, and IEEE802.11g
Client protocol: TCP/IP, Socket, LPD (LLPR), DHCP/WINS, HTTPD (SNMP)
Print protocol: Socket communication/LPR
Security protocol: WEP (64 bits/128 bits) or AES, TKIP (only when using WPA, WPA-PSK)
Shared key (for WEP), PSK, PEAP, TLS, TTLS, MD5, LEAP, EAP-FAST
Antenna: Built-in
Parameter setting: via USB, LAN, WLAN, RS-232C, Parallel
Default IP address: 192.168.10.21
Default subnet mask: 255.255.255.0
Certification: Wi-Fi, CCX V3, V4
 USB Host interface (Option: B-EX700-RTC-QM-R)
Physical Layer: Conforming to V2.0 Full speed
Transfer type: Control transfer, Bulk transfer
Transfer rate: Full speed (12M bps)
Number of ports: 1
Power supply: 50mA output
Connector: Type A
NOTE:
MAC address of the Wireless LAN module will be necessary when setting the MAC address filtering function of an
access point. Please ask a service person of your nearest TOSHIBA TEC service representative.