Toshiba E-STUDIO520 - Page 51

1. Easy Setup Flow
Network Administration Guide — Setup Flow for e-Filing Features 51
• Application
TWAIN compliant software (for the TWAIN driver only)
Microsoft Internet Explorer 5.5 Service Pack 2 or later must be installed.
Microsoft Internet Explorer is enabled to access the e-Filing web utility on this equip-
ment.
- The proxy settings must be configured correctly to enable the access.
- The browser must not be offline.
• Recommended Memory
For retrieving A4/LT 600dpi color image / 600dpi black image: 256 MB
For retrieving A3/LD 600dpi color image: 512 MB
System Requirements for e-BRIDGE Viewer
The e-BRIDGE Viewer is available for following environments:
• Display Resolution
1024 x 768 dots or more is recommended
• Display Color
High Color (16bit) or higher is recommended
•CPU
Pentium 300 MHz minimum (Pentium 1GHz or faster recommended)
•OS
Windows 2000 Service Pack 4
Windows XP Service Pack 1/Service Pack 2
Setup procedure
1. Setting up the TCP/IP.
This equipment must be connected to the TCP/IP network to use the e-Filing
client software. You should set the TCP/IP from the Touch Panel Display the
first time
z User Function Guide
4. SETTING ITEMS (ADMIN)
3. SETTING NETWORK FUNCTIONS
 Setting the TCP/IP Protocol
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
 Setting up the TCP/IP
2. Setting up the HTTP Network Service to enable e-Filing web
utility.
To access e-Filing using the e-Filing client software, the HTTP Server option
must be enabled because the software accesses e-Filing on this equipment
using the HTTP protocol.
z User Function Guide
4. SETTING ITEMS (ADMIN)
3. SETTING NETWORK FUNCTIONS
 Setting the HTTP Network Service
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
 Setting up the HTTP Network Service