3 Tests and Diagnostics 3.3 Setting of the hardware configuration
3-10 [CONFIDENTIAL] QOSMIO F20 Maintenance Manual (960-526)
? Setting of the HWSC
? Setting of the UUID
? Display of the DMI information (including UUID)
? Setting of DVD region code (Yes/No)
After completion of the above settings, H/W configuration & DMI information are
appeared in order. Check the contents and press Enter.
Subtest 03 DMI information save
This is one of tools to copy the DMI information to a new system board after
replacing.
This subtest saves all the DMI data in a floppy disk.
Subtest 04 DMI information recovery
This is one of tools to copy the DMI information to a new system board after
replacing.
This subtest writes all the DMI data in the floppy disk into the new system board.
NOTE: Since the data of UUID is updated every time when this subtest, DMI
information recovery, is done, the saved UUID data is not written.
To Next Page
Loading...
