4.2 Battery pack/PC card/Bridge Media 4 Replacement Procedures
QOSMIO F20 Maintenance Manual (960-526) [CONFIDENTIAL] 4-11
4.2.3 Bridge Media (SD Card / Memory Stick / xDPicture Card/Multi Media
Card)
Removing the Bridge media
The following describes the procedure for removing the bridge media (See Figure 4-3).
CAUTION: Insert or remove the Bridge Media in accordance with any instructions in the
each Bridge Media manual or the manuals of the computer system you are
using.
1. Push a Bridge media. It will pop out partly when you release, so pull out the card.
Figure 4-3 Removing the bridge media
Installing the Bridge media
The following describes the procedure for inserting the bridge media (See Figure 4-3).
1. Insert a bridge media and press it until it is securely connected.
Bridge media
To Next Page
Loading...
