4.19 Touch pad/Volume knob 4 Replacement Procedures
QOSMIO F20 Maintenance Manual (960-526) [CONFIDENTIAL] 4-53
4.19 Touch pad/Volume knob
4.19.1 Touch pad
Removing the touch pad
The following describes the procedure for removing the touch pad (See Figure 4-40).
1. Remove the following screws and touch pad.
? M2.5?3B U-THIN HEAD x6
Figure 4-40 Removing the touch pad
Installing the touch pad
The following describes the procedure for installing the touch pad (See Figure 4-40).
1. Install the touch pad and secure it with the following screws.
? M2.5?3B U-THIN HEAD x6
Touch pad
M2.5x3B U-THIN HEAD
To Next Page
Loading...
