4.23 Battery lock / Battery latch 4 Replacement Procedures
QOSMIO F20 Maintenance Manual (960-526) [CONFIDENTIAL] 4-67
4.23 Battery lock / Battery latch
Removing the battery lock / Battery latch
The following describes the procedure for removing the Battery lock / Battery latch (See
Figure 4-51).
1. Release the latch of the slider of the Battery latch assembly and separate the Battery
latch assembly.
2. Remove the spring from the Battery latch.
3. Release the latch of the slider of the Battery lock assembly and separate the Battery
lock assembly.
4. Remove the spring from the Battery lock.
(Battery latch) (Battery lock)
Figure 4-51 Removing the Battery lock / Battery latch
Battery latch
Battery lock
Latch
Latch
Spring
Spring
Slider
Slider