3 Tests and Diagnostics 3.20 ONLY ONE TEST
3-42 [CONFIDENTIAL] QOSMIO F20 Maintenance Manual (960-526)
Subtest 01 Pressed key display
When you execute this subtest, the keyboard layout is drawn on the display as
shown below. When any key is pressed, the corresponding key on the screen
changes to the key character that was pressed. Holding a key down enables the
auto-repeat function which causes the key’s display character to blink.
Press Del + Enter to end the test.
<<<< Press Key Display >>>>
IF TEST OK, Press [Dell][Enter]key
NOTE: The picture displayed on your computer may be slightly different from the figure
shown above.
To Next Page
Loading...
Need help?
General