3.31 SETUP 3 Tests and Diagnostics
QOSMIO F20 Maintenance Manual (960-526) [CONFIDENTIAL] 3-97
HDD Auto Off
Use this option to set the duration of the HDD automatic power off function. This
option appears only on the Pentium model.
xx Min. Automatically turns off the power to the hard disk drive
if it is not used for the duration set. The duration xx
can be set to 1, 3, 5, 10, 15, 20 or 30 minutes.
LCD Brightness
Use this option to set the level of LCD brightness.
Super-Bright Full brightness for maximum visibility.
Bright Full brightness for high visibility.
Semi-Bright Less than full brightness for saving power.
CPU Cooling Method
Maximum Performance If the CPU becomes too hot, the fan turns on
automatically in a high speed to cool down the
CPU.
Performance If the CPU becomes too hot, the fan turns on
automatically. When the CPU temperature falls to
a normal range, the fan turns off.
Battery optimized If the CPU becomes too hot, the processing speed is
lowered. If the temperature is still too high, the fan
turns on. When the CPU temperature falls to a
normal range, the fan is turned off and the
processing speed is increased.
NOTE: Too hot condition may cause defect on the CPU. When the hot condition
continues, the power is automatically turned off in hibernation mode.
(b) PCI Express Link ASPM
This option sets the power saving function of the PCI Express.
Auto Saves power consumption, when the PCI Express device is not
used while the battery is working. (Default)
Disabled Disables the power saving function and gives priority to the
performance.
To Next Page
Loading...
Need help?
General