Toshiba QOSMIO F20

3 Tests and Diagnostics 3.31 SETUP
3-104 [CONFIDENTIAL] QOSMIO F20 Maintenance Manual (960-526)
10. PCI Bus
This option displays the interrupt level for the Card Bus in the computer. It is for information
only and cannot be changed.
PCI BUS = IRQ10, IRQ11
11. Peripheral
Use this option to select the peripheral’s mode.
(a) Internal Pointing Device
This option enables or disables the touch pad.
Enabled Enables the touch pad. (Default)
Disabled Disables the touch pad.
12. LEGACY EMULATION
(a) USB KB/Mouse Legacy Emulation
This option sets the Legacy support condition of the USB keyboard and the USB
mouse.
Enabled Enables LEGACY support. (Default)
USB keyboard/USB mouse are available without the driver.
Disabled Disables LEGACY support
(b) USB-FDD Legacy Emulation
This option sets the Legacy support condition of the USB floppy disk drive.
When a computer is FDD built-in model, this option is not displayed.
Enabled Enables LEGACY support. (Default)
USB floppy disk is available without the driver.
Disabled Disables LEGACY support.
13. PCI LAN
This option sets the Enable / Disable of the built-in LAN functions.
Enabled Enables built-in LAN functions. (Default)
Disabled Disables built-in LAN functions.