Toshiba QOSMIO F20

4.14 System board 4 Replacement Procedures
QOSMIO F20 Maintenance Manual (960-526) [CONFIDENTIAL] 4-39
4. Remove the DC-IN jack, LAN jack from each slot and the TV antenna coaxial
cable from the TV antenna terminal.
Figure 4-28 Removing the system board
5. Remove the system board with DC-IN jack, LAN jack and TV antenna coaxial cable.
Take out the DC-IN cable under the Cable holder (R).
CAUTION: When removing the system board, do not damage I/O ports.
DC-IN jack
TV antenna
coaxial cable
Cable holder (R)
TV antenna terminal
LAN jack
M2.5?6S TAPPING
System board