Toshiba Tosvert VF-A5 - Parameter Setting Function [ Fnod in [,,-.Uc ]

7.4.4 Parameter Setting Function [ IPnOdlin [,,- .UI::: ]
Parameters can be set in the standard mode, but alternatively, the panel operation mode selection
( IPnOdl inc,- .UI::: ) can be changed as follows.
p n 0 d setting Function
n
Prohibit all key operations
w
+
'
Can perform reset
f
+ 2
Can perform monitor operations
+ '-I
Can perform emergency stop
+B
Can perform run/stop operations
+ 16
Can perform parameter read operations
+32
Can perform parameter change operations
53
Standard mode (all operations valid)
* If IF' n [: d I is set to 3 ' I (reset operations) and 2 (monitor operations) will be valid.
- 46 -