Toshiba Tosvert VF-S15 User Manual

E6582175
F-36
6
6.9 V/f 5-point setting
f190 : V/f5-point setting VF1 frequency
f191 : V/f 5-point setting VF1 voltage
f192 : V/f 5-point setting VF2 frequency
f193 : V/f 5-point setting VF2 voltage
f194 : V/f 5-point setting VF3 frequency
f195 : V/f 5-point setting VF3 voltage
f196 : V/f 5-point setting VF4 frequency
f197 : V/f 5-point setting VF4 voltage
f198 : V/f 5-point setting VF5 frequency
f199 : V/f 5-point setting VF5 voltage
 For details, refer to 8) of section 6.3.
6.10 Frequency priority selection
6.10.1 Using two frequency commands according to the
particular situation
fmod : Frequency setting mode selection 1
f200 : Frequency priority selection
f207 : Frequency setting mode selection 2
 For details, refer to section 5.8.

Toshiba Tosvert VF-S15 Specifications

General

Category	Inverter
Control Method	V/f control, Sensorless vector control
Cooling Method	Forced air cooling
Model	Tosvert VF-S15
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication Options	Modbus RTU
Overload Capacity	150% for 1 minute
Braking Unit	Built-in braking transistor
Output Voltage	3-Phase, same as input voltage
Operating Temperature	-10 to +50°C (14 to 122°F)
Storage Temperature	-20 to 65°C (-4 to 149°F)
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m above sea level
Input Voltage	3-Phase 200 to 240 VAC, 3-Phase 380 to 480 VAC
Weight	Varies depending on model (e.g., 0.8 kg to 16 kg)