Toshiba Tosvert VF-S15 User Manual

E6582175
F-136
6
[Parameter setting]
Title Function Adjustment range Default setting

Panel display selection at power on
0:
hello
1:
f791 to f794
2, 3: -
0

1st and 2nd characters of 
0-FFFF 2d2d

3rd and 4th characters of 
0-FFFF 2d2d

5th and 6th characters of 
0-FFFF 2d2d

7th and 8th characters of 
0-FFFF 2d2d
Select = and set displayed characters with  to  if it is displayed characters other
than “
hello”.
Refer to “ASCII LED ” of “Communication Function Instruction Manual : E6581913” about setting characters
and set by hex number.
6.35 Tracing functions
f740 : Trace selection
f741 : Trace cycle
f742 : Trace data 1
f743 : Trace data 2
f744 : Trace data 3
f745 : Trace data 4
 For details, refer to ”Trace Function Instruction Manual : E6581922”.

Toshiba Tosvert VF-S15 Specifications

General

Category	Inverter
Control Method	V/f control, Sensorless vector control
Cooling Method	Forced air cooling
Model	Tosvert VF-S15
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication Options	Modbus RTU
Overload Capacity	150% for 1 minute
Braking Unit	Built-in braking transistor
Output Voltage	3-Phase, same as input voltage
Operating Temperature	-10 to +50°C (14 to 122°F)
Storage Temperature	-20 to 65°C (-4 to 149°F)
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m above sea level
Input Voltage	3-Phase 200 to 240 VAC, 3-Phase 380 to 480 VAC
Weight	Varies depending on model (e.g., 0.8 kg to 16 kg)