Toshiba Tosvert VF-S15 User Manual

E6582175
K-4
11
Title
Communication
No.
Function Unit
Minimum
setting unit
Panel/Commun
ication
Adjustment range
Default
setting
User
setting
Reference

0007 Default setting - - 0: -
1: 50Hz default setting
2: 60Hz default setting
3: Default setting 1 (Initialization)
4: Trip record clear
5: Cumulative operation time clear
6: Initialization of type information
7: Save user setting parameters
8. Load user setting parameters
9. Cumulative fan operation time
record clears
10, 11: -
12: Number of starting clear
13: Default setting 2 (Complete
initialization)
0 4.3.2

0099 Checking the
region setting
* 5
- - 0: Start setup menu
1: Japan (read only)
2: North America (read only)
3: Asia (read only)
4: Europe (read only)
*1 4.4

0050 EASY key mode
selection
- - 0: Standard setting mode at power on
1: Easy setting mode at power on
2: Easy setting mode only
0 4.5

-
Extended parameter
starting at 100
--- - - 4.2.2

-
Extended parameter
starting at 200
--- --

-
Extended parameter
starting at 300
--- --

-
Extended parameter
starting at 400
--- --

-
Extended parameter
starting at 500
--- --

-
Extended parameter
starting at 600
--- --

-
Extended parameter
starting at 700
--- --

-
Extended parameter
starting at 800
--- --

-
Extended parameter
starting at 900
--- --

- Extended parameter
starting at A
--- --

- Extended parameter
starting at C
--- --

-
A
utomatic edit
function
- - - - - 4.3.1
*1: Default setting values vary depending on the setup menu setting. Refer to section 11.5.
*5: Set “0” to activate the setup menu. Refer to section 11.5 about setting contents selected in setup menu.

Toshiba Tosvert VF-S15 Specifications

General

Category	Inverter
Control Method	V/f control, Sensorless vector control
Cooling Method	Forced air cooling
Model	Tosvert VF-S15
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication Options	Modbus RTU
Overload Capacity	150% for 1 minute
Braking Unit	Built-in braking transistor
Output Voltage	3-Phase, same as input voltage
Operating Temperature	-10 to +50°C (14 to 122°F)
Storage Temperature	-20 to 65°C (-4 to 149°F)
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m above sea level
Input Voltage	3-Phase 200 to 240 VAC, 3-Phase 380 to 480 VAC
Weight	Varies depending on model (e.g., 0.8 kg to 16 kg)