OPERATOR’S MANUALseries Robot Controller
The screen for the compile error message detailed display is shown above. The
compile errors are shown in the following format:
Error occurrence line number: Error occurrence block (Line number from top line:
TOP) > Error number.
For details about specific errors, refer to the Appendix "Compile Error and Compile
Warning Messages" in the Robot Language Manual.
(c) Step 3: Error display.
Press the function key corresponding to the [CURRE] menu, and the display
of error or errors currently generated is shown.
STE 80720
– 11-9 –
To Next Page
Loading...
