350907" Cwvjgpvkecvkqp"Ugtxgt"Itqwr"Eqphki"
On this page users can group authentication servers running the same secure protocol for
authentication. The switch has two built-in authentication server group, one for RADIUS and the
other for TACACS+. These two server groups cannot be edited or deleted. The server entries in
one group are tried in the order they are added.
Choose the menu Pgvyqtm"Ugewtkv{→CCC→Ugtxgt"Itqwr to load the following page.
Figure 13-5 Create New Server Group
Figure 13-6 Add Server to Server Group
" Eqphkiwtcvkqp"Rtqegfwtg<"
1) Configure the Server Group name and Server Type to create a server group. (Figure 13-5)
2) C
lick gfkv in the Server Group List to configure the corresponding server group. (Figure 13-5)
3)
Select Server IP you have previously created and click Cff to add the server to the server
group. (Figure 13-6)
V
iew and delete the configured server groups in the Server Group List.
View and delete the configured servers in the Server List.
" Gpvt{"Fguetkrvkqp<"
Ugtxgt"Itqwr<"
Define a server group with a group name.
Ugtxgt"V{rg<"
Specify the server type as RADIUS or TACACS+.
Ugtxgt"KR"
Select the IP of the server you have previously configured.
Pqvg<"
1. The two built-in server groups radius and tacacs cannot be deleted or edited.
2. Up to 16 servers can be added to one server group.
227
To Next Page
Loading...
