" Gpvt{"Fguetkrvkqp<"
Ogvjqf"Nkuv"
Pcog<"
Define a method list name.
Nkuv"V{rg<"
Specify the authentication type as Login or Enable. Login stands
for the Authentication Login Method List, and Enable stands for the
Authentication Enable Method list.
Rtk3."Rtk4."Rtk5."
Rtk6<"
Specify the authentication methods in order. The next
authentication method is tried only if the previous method does not
respond, not if it fails.
nqecn< Use the local database in the switch for authentication.
pqpg< No authentication is used.
tcfkwu< Use the remote RADIUS server/server groups for
authentication.
vceceu< Use the remote TACACS+ server/server groups for
authentication.
wugt/fghkpgf" ugtxgt" itqwr< Use the user-defined server
groups for authentication.
Vkru<
If the Enable password is verified on the remote RADIUS server, the switch will send the Enable
authentication with the default username as $enable$.
350909" Crrnkecvkqp"Cwvjgpvkecvkqp"Nkuv"Eqphki"
Users can configure authentication method lists on the following access applications: console,
telnet, ssh and http.
Choose the menu Pgvyqtm"Ugewtkv{→CCC→Inqdcn"Eqphki to load the following page.
Figure 13-4 Application Authentication Settings
" Eqphkiwtcvkqp"Rtqegfwtg<"
1) Select the application module.
2) Configure the authentication method list from the Login List drop-down menu. This option
defines the authentication method for users accessing the switch.
3) Configure the authentication method list from the Enable List drop-down menu. Thisoption
defines the authentication method for users requiring the administrator privilege.
229
To Next Page
Loading...
