Choose the
menu XNCP→Rtkxcvg"XNCP→Rqtv"Eqphki to load the following page.
Figure 6-17 Create and View Protocol Template
The following entries are displayed on this screen:
" Rqtv"Eqphki"
Rqtv<"
Select the desired port for configuration.
Rqtv"V{rg<"
Select the Port Type from the pull-down list for the port.
Rtkoct{"XNCP<"
Specify the Primary VLAN the port belongs to.
Ugeqpfct{"XNCP<
Specify the Secondary VLAN the port belongs to.
" Rtkxcvg"XNCP"Rqtv"Vcdng"
Rqtv"KF<"
Displays the port number.
Rqtv"V{rg<"
Displays the corresponding Port Type.
Qrgtcvkqp<"
Click Tgoqxg to delete the port.
Pqvg<"
1. A Host Port can only join to a Private VLAN.
2. A Promiscuous Port can only join to a Primary VLAN.
3. If you want to add a Promiscuous port to different Private VLANs with the same Primary VLAN,
you need to add the Promiscuous port to any one of these Private VLANs.
Eqphkiwtcvkqp"Rtqegfwtg<"
Uvgr" Qrgtcvkqp" Fguetkrvkqp"
1 Create Private VLAN. Required. On the XNCP→Rtkxcvg"XNCP→RXNCP" Eqphki"
page, Enter the Primary VLAN and Secondary VLAN, and
then click the Etgcvg button.
2 Add ports to Private VLAN Required. On the XNCP→Rtkxcvg" XNCP→Rqtv" Eqphki
page, select the desired ports and configure the port types
and click the Cff"button.
3 Modify VLAN. Optional. On the XNCP→Rtkxcvg" XNCP→RXNCP" Eqphki
page, select the desired Private VLAN and do the
modification, then click the Crrn{ button to modify the
information of the corresponding VLAN.
84
To Next Page
Loading...
