TP-Link Touch P5 User Manual

Chapter 3 Configure Touch P5 as a Repeater
73
3. 9. Reboot & Reset
With the Reboot & Reset app, you can restart your Touch P5 or reset it to its factory
default settings.
1. On the menu screen, tap the Reboot & Reset icon to start it.
2. Reboot: Your Touch P5 will shut down and boot again.
Reset: To reset your Touch P5 to its factory default settings and all the settings you
have configured will be erased.
Note: Please do NOT power off your Touch P5 during the rebooting or resetting process.
3. 10. Administrator Password
Administrator password is used to log in to the touchscreen page and web management
page of your Touch P5. You are required to set a new administrator password at your
first login. You can also change it with the Administrator Password app.
1. On the menu screen, tap the Administrator Password icon to start it.
2. Enter the old password. Enter the new password and enter again to confirm.

TP-Link Touch P5 Specifications

General

Color	black
Frequency Band	2.4 ghz, 5.0 ghz
QoS Traffic Prioritization	yes
Ethernet Standard	10/100/1000
Ethernet Switch	yes
Wireless Standard	ac
Gigabit Ethernet Speed	yes
Antennas	3
Parental Control	yes
Firewall	other
Data Encryption	yes
Encryption Type	wep
Ports	rj-45
WAN Ports	1
Built In Modem	no
System Requirements	microsoft windows 98se, nt, 2000, xp, vista™ or windows 7, 8, 8.1, mac os, netware, unix or linux; internet explorer 11, firefox 12.0, chrome 20.0, safari 4.0, or other java-enabled browser

Weight and Dimensions

Height	2.1 inches
Width	11.2 inches
Net Weight	2.98 pounds