TP-Link Touch P5 User Manual

Chapter 3
Configure Touch P5 as a
Repeater
This chapter introduces how to connect and configure your Touch P5 in repeater
mode which will extend the existing wireless coverage by repeating the wireless
signal. We recommend that you use repeater mode when you want a larger wireless
coverage to eliminate “dead zones”. You can also use Touch P5 as an adapter to
connect any Ethernet-enabled device (such as a Blu-ray player, game console, DVR, or
smart TV) to your Wi-Fi network.
This chapter includes the following sections:
• Quick Setup
• Entertainment Adapter
• Mode Selection
• Wireless Settings
• Devices Control
• LAN
• DHCP Server
• Screen Settings
• Reboot & Reset
• Administrator Password
• About
• FAQ

TP-Link Touch P5 Specifications

General

Color	black
Frequency Band	2.4 ghz, 5.0 ghz
QoS Traffic Prioritization	yes
Ethernet Standard	10/100/1000
Ethernet Switch	yes
Wireless Standard	ac
Gigabit Ethernet Speed	yes
Antennas	3
Parental Control	yes
Firewall	other
Data Encryption	yes
Encryption Type	wep
Ports	rj-45
WAN Ports	1
Built In Modem	no
System Requirements	microsoft windows 98se, nt, 2000, xp, vista™ or windows 7, 8, 8.1, mac os, netware, unix or linux; internet explorer 11, firefox 12.0, chrome 20.0, safari 4.0, or other java-enabled browser

Weight and Dimensions

Height	2.1 inches
Width	11.2 inches
Net Weight	2.98 pounds