Chapter 3 Configure Touch P5 as a Repeater
61
5. Go to the menu screen and tap the Quick Setup icon to start it.
6. Follow the onscreen instructions to complete the configuration.
7. Once the configuration is completed, please follow the instructions below to
relocate your Touch P5. The location you choose must be within the range of the
host network.
• Halfway Between - Generally, the ideal location for your Touch P5 is halfway
between the host router and wireless client. If the wireless signal is not
satisfactory, you can place your Touch P5 somewhat closer to the host router.
Host Network Extended Network
Ideal Location
• No Obstacles and Spacious - Clear obstacles in the way between your Touch
P5 and the host router. It’s better to locate it in a spacious place, such as in a
corridor.
• No Interference - Choose a location away from Bluetooth devices and other
household electronics, such as a cordless phone, microwave, and baby monitor,
etc., to minimize signal interference.
8. Connect your wireless clients to the network of your Touch P5.
Note: The extended networks of Touch P5 share the same passwords as those of the host networks, but may
have different wireless network names if you have customized them during the configuration. Please connect your
wireless devices to one extended network of your Touch P5.
3. 1. 2. Option 2: Through Web-based Utility
The web-based utility can be used on any Windows, Macintosh or UNIX OS with a web
browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari. Follow the
steps below to log into your Touch P5.
1. Install the antennas and position them vertically.
2. Plug your Touch P5’s power adapter into an electrical outlet near your host router.
Turn it on and wait until the system boot on the screen completes.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
