TP-Link Touch P5 User Manual

Chapter 2 Configure Touch P5 as a Router
21
Now devices in the blacklist cannot connect to your Touch P5.
2. 10. Printer Server
The Printer Server app guides you how to share a printer with different computers
connected to your Touch P5.
1. Install the Driver of the Printer
Make sure you have installed the driver of the printer on each computer that needs
printer service. If you do not have the driver, contact the printer manufacturer.
2. Connect the Printer
Connect a printer to the USB port of your Touch P5 via a USB cable. Restart the
Printer Server app again to see the Printer Name listed on the screen.
Note: You can check Printer Compatibility List at http://www.tp-link.com/app/usb/ to verify whether your
printer is supported by your Touch P5. Printers unlisted may be incompatible with your Touch P5.
3. Install the TP-LINK USB Printer Controller Utility
TP-LINK USB Printer Controller Utility helps you access the shared printer. Download
and Install the utility on each computer that needs printer service.
You can get the utility from http://www.tp-link.com/app/usb/. PC Utility for Windows
computers and Mac Utility for Mac computers.
Done!

TP-Link Touch P5 Specifications

General

Color	black
Frequency Band	2.4 ghz, 5.0 ghz
QoS Traffic Prioritization	yes
Ethernet Standard	10/100/1000
Ethernet Switch	yes
Wireless Standard	ac
Gigabit Ethernet Speed	yes
Antennas	3
Parental Control	yes
Firewall	other
Data Encryption	yes
Encryption Type	wep
Ports	rj-45
WAN Ports	1
Built In Modem	no
System Requirements	microsoft windows 98se, nt, 2000, xp, vista™ or windows 7, 8, 8.1, mac os, netware, unix or linux; internet explorer 11, firefox 12.0, chrome 20.0, safari 4.0, or other java-enabled browser

Weight and Dimensions

Height	2.1 inches
Width	11.2 inches
Net Weight	2.98 pounds