TP-Link Touch P5 User Manual

Chapter 4 Configure Touch P5 as an Access Point
79
4. 3. Quick Setup
The Quick Setup app on the touchscreen will guide you through the process to set the
wireless network of your Touch P5.
1. On the menu screen, tap the Quick Setup icon to start it.
2. Follow the on-screen instructions to complete the configuration.
3. Once the configuration is completed, please connect your wireless devices to the
wireless network of your Touch P5.
Note: If you change the preset wireless network name (SSID) and wireless password during the quick setup
process, all your wireless devices must use the new SSID and password to connect to your Touch P5.
4. 4. Mode Selection
The Mode Selection app helps you easily switch your Touch P5 to a router, repeater or
an access point.
• Router Mode (Default): Touch P5 provides Internet access for multiple wired and
wireless devices simultaneously.
• Repeater Mode: Touch P5 extends your existing wireless coverage by repeating the
wireless signal.

TP-Link Touch P5 Specifications

General

Color	black
Frequency Band	2.4 ghz, 5.0 ghz
QoS Traffic Prioritization	yes
Ethernet Standard	10/100/1000
Ethernet Switch	yes
Wireless Standard	ac
Gigabit Ethernet Speed	yes
Antennas	3
Parental Control	yes
Firewall	other
Data Encryption	yes
Encryption Type	wep
Ports	rj-45
WAN Ports	1
Built In Modem	no
System Requirements	microsoft windows 98se, nt, 2000, xp, vista™ or windows 7, 8, 8.1, mac os, netware, unix or linux; internet explorer 11, firefox 12.0, chrome 20.0, safari 4.0, or other java-enabled browser

Weight and Dimensions

Height	2.1 inches
Width	11.2 inches
Net Weight	2.98 pounds