TR-Electronic CEV-65 - Parameterization; Conceptualities for Object Description

Printed in the Federal Republic of Germany  TR-Electronic GmbH 2008, All Rights Reserved
06/27/2017 TR - ECE - BA - DGB - 0073 - 07 Page 103 of 155
7 Parameterization
Conceptualities for the object description
Term
Description
Attribute-ID (Attr.-ID)
Integer value which is assigned to the
corresponding attribute
Access
Access rule
Set:
The attribute can be accessed by means of
Set_Attribute services (writing).
Note:
Set attributes can also be accessed by means of
Get_Attribute services.
Get:
The attribute can be accessed by means of
Get_Attribute services (reading)
NV (non volatile), V (volatile)
Storage of the attributes (parameter)
NV:
The attribute is permanently stored in the
measuring system
V:
The attribute is not permanently stored in the
measuring system
Name
Attribute name
Data type
Data type of the attributes
Description
Attribute description
Default
Attribute standard value
Table 7: Terminology