TR-Electronic CEV-65 - Attribute 0 X70, Accept Parameter

Printed in the Federal Republic of Germany  TR-Electronic GmbH 2008, All Rights Reserved
06/27/2017 TR - ECE - BA - DGB - 0073 - 07 Page 129 of 155
7.6.3.7 Attribute 0x70, Accept Parameter
Accept Parameter saves the measuring system parameter into the non-volatile
memory (EEPROM).
With write access ≠0 all changed attributes are stored permanently and the
acceptance of changed values for the instance attributes
● 0x0C, Direction Counting Toggle
● 0x65, Total Measuring Range
● 0x66, Number of Revolutions - numerator and
● 0x67, Number of Revolutions - divisor
is performed.
Attr.-ID
0x70
Data type
USINT
Access
Set / Get
Lower limit
0
Upper limit
255
Default
0
Connection path, Packed EPATH with 8 bit class
0x20
0x23
0x24
0x01
0x30
0x70
Logical Type
= Class
Class #23
Logical Type
= Instance
Instance #1
Logical Type
=Attr.-ID
Attr.-ID #112