Printed in the Federal Republic of Germany TR-Electronic GmbH 2008, All Rights Reserved
06/27/2017 TR - ECE - BA - DGB - 0073 - 07 Page 143 of 155
4. Switch on the supply voltage
– The measuring system starts with DHCP requests, which are registered into
the Request History with the corresponding MAC address:
5. Double click one of the entries:
● The New Entry dialog allows you to enter all of the parameters required for an
address relation:
Ethernet Address (MAC): is entered automatically!
IP Address: Enter desired IP address
Hostname: not supported
Description: optional
To Next Page
Loading...
