34
TK 61009-12-OP-EN
Daylight Saving Time Set
Similarly to brightness, this function allows to adjust the display
background for easier reading.
This menu enables an auto adjustment of the Real Time Clock
(RTC) as per the Daylight Saving Time (DST). By default, on the 4th
Sunday of March and 4th Sunday of October at 2 a.m. GMT or 3 a.
m. CET, the clock will be adjusted forward or backward by 1 hour.
This default setup can be overwritten and manual adjustment by
1h (+ or –) is possible in case the country in which the TouchLog is
used does not follow this calendar.
TouchLog Firmware
This menu displays the firmware version 515.xxx.
Media Selection for Printing
This function allows the possibility to print the data into a soft copy
version through a USB flash drive vs a printed ticket. If USB is
selected, the data will be sent to the flash drive with the 2 formats
available (txt and pdf). If no USB flash drive is detected, the USB
symbol will be crossed on the display and no data will be sent
through this media, neither to the thermal printer.
Labels
This menu allows defining specific name for each inputs. By
default, pre-defined names are available in the Input setting menu.
When new labels are created through this menu, these are made
available in the Input settings menu selection.
Temperature Unit of Measure
The temperature can be recorded and display in Celsius or
Fahrenheit on the display and on the ticket. By pressing on that
icon, the logo will change indicating the format °C or °F, By default,
the temperature unit of measure is Celsius.
BBaassiicc OOppeerraattiioonnss
To Next Page
Loading...