TK 61009-12-OP-EN
67
10. Installation complete.
NNoottee:: This installation example is for Windows 8 operating system, other
installations on other operating systems will vary.
Performance at High Ambient Temperatures (Above
45ºC)
The TouchLog will stop for around 30s in the middle of the printout – and
then resume printing. This is required to allow the printing mechanism to
cool down.
Performance at Low Ambient Temperatures (Under
-10ºC)
The user will notice that the response time of the touchscreen is 1 or 2
seconds. The user needs to wait those 2 seconds for the screen to refresh.
Error Message – USB Stick
Displayed when the user try to print data to USB and this is not
possible.
EExxaammpplleess::
• USB key not connected
• TouchLog is not able, for some reasons, to finalize the
procedure to write the file in the USB memory stick (e.g. USB
full or write protected)
FFrreeqquueennttllyy AAsskkeedd QQuueessttiioonnss
To Next Page
Loading...