60
TK 61009-12-OP-EN
4. Right click on Keil USB device and go to Update Driver Software. Browse
for the location where you have put the driver files.
5. Go again to Device Manager and if you see MCB…(COMx) all is correct.
The COMx is the port you need for wintrac (see “TouchLog
Communication to Wintrac,” p. 59).
NNoottee:: TouchLog has to be connected to the laptop when installing the driver.
FFrreeqquueennttllyy AAsskkeedd QQuueessttiioonnss
To Next Page
Loading...