TK 61009-12-OP-EN
69
Other Errors reported from TouchLog
EErrrroorr CCooddeess
Every error condition will generate an alarm code, as below.
Error Code
Description Remedy
E1 I1 error
Electrical connection fault or wrong input
configuration. Verify correspondence
between configuration and input real use,
check electrical connection.
E2 I2 error
E3 I3 error
E4 I4 error
E5 I5 error
E6 I6 error
E7 RTC error
Internal battery fault/ DL hardware damage
E8 Not used
E9
Open door I1
Check door
E10
Open door I2
Check door
E11
Open door I3
Check door
E12
Open door I4
Check door
E13
Open door I5
Check door
E14
Open door I6
Check door
E15 Not used
E16 Not used
E17
I1 temperature out of
range
Ix input used to measure temperature. Ix
temperature is out of the configured limits,
under Ix Tmin or over Ix Tmax
E18
I2 temperature out of
range
E19
I3 temperature out of
range
E20
I4 temperature out of
range
E21
I5 temperature out of
range
E22
I6 temperature out of
range
FFrreeqquueennttllyy AAsskkeedd QQuueessttiioonnss
To Next Page
Loading...