0-24 Display Line 3 Large
Select a variable for display in line 3.
Option: Function:
[1502] * kWh Counter
The options are the same as listed for par.0-20
Display Line 1.1 Small.
0-25 My Personal Menu
Array [20]
Range: Function:
0 N/A* [0 - 9999 N/A] Define up to 20 parameters to appear in the Q1 Personal Menu, accessi-
ble via the [Quick Menu] key on the keypad. The parameters will be
displayed in the Q1 Personal Menu in the order they are programmed
into this array parameter. Delete parameters by setting the value to
‘0000’.
For example, this can be used to provide quick, simple access to just one
or up to 20 parameters which require changing on a regular basis (e.g.
for plant maintenance reasons) or by an OEM to enable simple commis-
sioning of their equipment.
0-3*keypad Custom Readout
It is possible to customize the display elements for various purposes: *Custom Readout. Value proportional to
speed (Linear, squared or cubed depending on unit selected in par.0-30
Custom Readout Unit) *Display Text.
Text string stored in a parameter.
Custom Readout
The calculated value to be displayed is based on settings in par.0-30
Custom Readout Unit, par.0-31 Custom
Readout Min Value (linear only), par.0-32 Custom Readout Max Value, par.4-13 Motor Speed High Limit
[RPM], par.4-14 Motor Speed High Limit [Hz] and actual speed.
The relation will depend on the type of unit selected in par.0-30 Custom Readout Unit:
Parameter Description
TR200 Programming Guide 49
To Next Page
Loading...
