Triumph Rocket 3 R User Manual

Maintenance
119
Scheduled Maintenance
Warning
Triumph Motorcycles cannot accept
any responsibility for damage or injury
resulting from incorrect maintenance
or improper adjustment carried out by
the owner.
Incorrect or neglected maintenance
can lead to a dangerous riding
condition.
Always have an authorized Triumph
dealer carry out the scheduled
maintenance of this motorcycle.
Warning
All maintenance is vitally important
and must not be neglected. Incorrect
maintenance or adjustment may cause
one or more parts of the motorcycle
to malfunction. A malfunctioning
motorcycle may lead to loss of control
and an accident.
Weather, terrain and geographical
location affect maintenance. The
maintenance schedule should be
adjusted to match the particular
environment in which the motorcycle
is used and the demands of the
individual owner.
Special tools, knowledge and training
are required in order to correctly carry
out the maintenance items listed in
the scheduled maintenance chart.
Only an authorized Triumph dealer will
have this knowledge and equipment.
Incorrect or neglected maintenance
can lead to a dangerous riding
condition. Always have an authorized
Triumph dealer carry out the
scheduled maintenance of this
motorcycle.
To maintain the motorcycle in a safe
and reliable condition, the maintenance
and adjustments outlined in this section
must be carried out as specified in the
schedule of daily checks, and also in line
with the scheduled maintenance chart.
The information that follows describes
the procedures to follow when carrying
out the daily checks and some simple
maintenance and adjustment items.

Triumph Rocket 3 R Specifications

General

Displacement	2458 cc
Bore x Stroke	110.2 mm x 85.9 mm
Compression Ratio	10.8:1
Max Torque	221 Nm @ 4, 000 rpm
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	Shaft
Gearbox	6-speed
Swingarm	Single-sided, cast aluminium
Front Tyre	150/80 R17 V
Rear Tyre	240/50 R16 V
Seat Height	773 mm
Dry Weight	291 kg
Wheelbase	1677 mm
Engine Type	Liquid-cooled, DOHC, inline 3-cylinder
Max Power	165 hp (123 kW) @ 6000 rpm
Exhaust	Stainless steel 3 into 1 headers with 3 exit silencer
Clutch	Hydraulic, torque assist
Frame	Full aluminium frame
Front Suspension	Showa 47 mm upside-down
Rear Suspension	Showa monoshock with piggyback reservoir, adjustable
Front Brakes	Brembo Stylema® 4-piston radial monobloc calipers
Rear Brakes	Brembo 4-piston monobloc caliper
Front Wheel	17 x 3.5 in
Rear Wheel	16 x 7.5 in
Fuel Tank Capacity	18 L
Instrument Display	TFT multi-functional instrument pack with digital speedometer, trip computer, digital tachometer, gear position indicator, fuel gauge, service indicator, ambient temperature, clock and rider modes