Maintenance
121
Scheduled Maintenance Table
Operation Description
Odometer Reading in Miles (km) or Time Period, whichever comes first
First
Service
Annual
Service
Mileage Based Service
Every
600 (1,000)
6 Months
Ye a r
10,000
(16,000)
30,000
(48,000)
20,000
(32,000)
40,000
(64,000)
Lubrication
Engine – check for leaks Day • • • • •
Engine oil – replace - • • • • •
Engine oil filter – replace - • • • • •
Fuel System and Engine Management
Autoscan – carry out a full Autoscan using the Triumph
diagnostic tool (print a customer copy)
- • • • • •
Fuel system - visually check fuel hoses for chafing,
cracks or damage. Replace if necessary
Day • • • • •
Air filter - replace (replace more often if consistently
riding in wet or dusty conditions)
- • • •
Fuel filter – replace - • • •
Throttle bodies – balance - • • •
Ignition System
Spark plugs – replace - • •
Cooling System
Cooling system – check for leaks Day • • • • •
Coolant level – check/adjust Day • • • • •
Cooling system - check coolant hoses for chafing,
cracks or damage. Replace if necessary
- • • •
Coolant – replace Every 3 years, regardless of mileage
Engine
Clutch – check operation Day • • • • •
Clutch fluid levels – check Day • • • • •
Clutch fluid – replace Every 2 years, regardless of mileage
Valve clearances – check/adjust - • •
Camshaft timing - check/adjust - • •
Wheels and Tires
Wheel bearings – check for wear/smooth operation
First check at 30,000 miles (48,000 km) then every 10,000 miles (16,000 km)
Rear wheel needle roller bearing (left hand side outer
only) – lubricate
- • • •
Tire wear/tire damage – check Day • • • • •
Tire pressures – check/adjust Day • • • • •