Maintenance
143
Rear Suspension Rebound Damping
Adjustment
The rebound damping adjuster is
located behind the side panel on the
right hand side of the motorcycle.
1
1. Rebound damping adjuster
To change the rebound damping setting:
•
Remove the right hand side panel,
see page 82.
•
Insert a flat head screwdriver
into the slotted rebound damping
adjuster.
•
Rotate the rebound damping
adjuster clockwise to increase, or
counterclockwise to decrease.
•
Always count the number of
counterclockwise turns from the
fully clockwise position.
Rear Suspension Compression
Damping Adjustment
The compression damping adjuster
is located at the bottom of the rear
suspension unit on the right hand side
of the motorcycle.
1
1. Compression damping adjuster
To change the compression damping
setting:
•
Insert a flat head screwdriver into
the slotted compression damping
adjuster.
•
Rotate the compression damping
adjuster clockwise to increase, or
counterclockwise to decrease.
•
Always count the number of
counterclockwise turns from the
fully clockwise position.
To Next Page
Loading...
